LCD 8850 Diamond – Stationary

The LCD 8850 Diamond is a curing light LED lamp with an extremely powerful output between 450 and 490 nm. Therefore, we have plenty of light output to cure dental composite.

The technology in the LCD 8850 Diamond prevents the formation of gaps between the composite and the dentine/enamel during the curing process and after.

LCD8850 Diamond have been greatly improved in several aspects, one thing is the precision of the light frequency, as of the release of LCD8850 it is the most efficient in smelting compecit material, on the market.

ATEMedico’s LED handpiece has a completely noiseless cooling system – not even a whisper – 0 dB!

ATEMedico’s design is characterised by simple solutions:

• There is only one button on the handpiece to start the
  curing cycle.
• There are threecuringcycles.ATEMedico’s standardcycle
  is a “soft start”cyclewhich runs for50 seconds.For thefirst
  30 seconds of the cycle the outputislow and thenincreases
  tomaximum power for the remaining20 seconds.
• The operator can stop and restart the cycle at any time by
  pressing the same button on the handpiece.
• The handpiece can easily be dismantled from the cable.
• There is no complicated programming.
• No upgrades are required.

Light guide: The light guides for the LCD 8960 are available in several different sizes for different applications.

Hygiene has always been a problem in connection with curing lights and it still is. There- fore, we have designed a special transparent disposable cover in a super soft material to be pulled over the handpiece and part of the cable. The cover provides optimal light transmission in the blue wavelength range and is comfortable for both operator and patient. Even the patient can’t fail to notice the hygiene aspect of this accessory.

The LCD 8860 Diamond is an integration model. The handpiece is provided with operating voltage via a super-flexible silicone cable.