LCD 8937B curing light from Lysta

The LCD 8937B is a battery-driven, tabletop LED curing light with an extremely powerful output

Item number 02-12895

LCD 8937B curing light from Lysta

The LCD 8937B HI-POWER is an LED lamp with an extremely powerful output between 450 and 490 nm. Therefore, we have plenty of light output to cure dental composite.

The technology in the LCD 8937B prevents the formation of gaps between the composite and the dentine/enamel during the curing process and after.

It is not possible to apply LED technology without a cooling system, if you want to ensure a constant output. Lysta’s LED handpiece has a completely noiseless cooling system – not even a whisper – 0 dB!

Lysta’s design is characterised by simple solutions: There is only one button on the handpiece to start the curing cycle.

There are three curing cycles. Lysta’s standard cycle is a “soft start” cycle which runs for 50 seconds. For the first 30 seconds of the cycle the output is low and then increases to maximum power for the remaining 20 seconds.

The operator can stop and restart the cycle at any time by pressing the same button on the handpiece.

The handpiece can easily be dismantled from the cable.

There is no complicated programming.

No upgrades are required.

Light guide: The light guides for the LCD 8937B are available in several different sizes for different applications.

Hygiene has always been a problem in connection with curing lights and it still is.

Therefore, we have designed a special transparent disposable cover in a super soft material to be pulled over the handpiece and part of the cable.

The cover provides optimal light transmission in the blue wavelength range and is comfortable for both operator and patient. Even the patient can’t fail to notice the hygiene aspect of this accessory.

The LCD 8837B HI-POWER is battery-driven.

The rechargeable batteries in this stand-alone model can be recharged during use, if necessary.

The device is designed to cope with more than a whole day’s operation in a busy clinic (i.e. the equivalent of 5 hours non-stop). The handpiece is provided with operating voltage via a super-flexible silicone cable.

Technical information

Lysta’s LED curing light – a battery-driven stand-alone model (a mains adaptor is also included)

Diameter of handpiece: 16mm

Length: 195 mm with light guide

Weight: 100g

Total output: 500 mW (or 600-800 on a Demetron meter)

We use cookies, and we hope it is ok with you  Learn more