Lysta LUNA Office build in x-ray screen

The LUNA Office is based upon the electronics in the LUNA II viewer and is intended for integra-tion in a drawer.

The acryllic screen has the same dimensions as the drawer which makes it easy to work with x-ray films and film mounts.

The ON/OFF switch is on the front of the drawer.

There is a special cable mechanism at the back of the drawer which makes it easy to pull the drawer in and out without getting the cable stuck.

There are plugs at both ends of the cable to facilitate connection.

The light intensity can not be regulated.

The LUNA Office is available in two different sizes. 435 x 371 x 48 mm / 414 x 317 x 47mm          

All of Lysta’s LUNA x-ray viewers are equipped with an electronic control which converts the mains frequency (50 – 60 Hz) to 30.000 – 50.000 Hz.

As a result, the human eye perceives the light from the viewer as flicker-free.

Greater accuracy of diagnosis: The accuracy of your diagnosis will be increased substantially by the flicker-free light emitted by Lysta’s LUNA.

Scientific tests have proven that a light which flickers not only tires the eyes but also reduces the ability to concentrate.

Longer life-span for standard fluorescent tubes: Due to the electronic control in Lysta’s

LUNA it is possible to use standard fluorescent tubes in the viewer. It also increases the life-span of the tubes.